I had asked how to change a rear turn signal light in the back of a Chevy S 10..?

now I want to know how to remove the lens that covers the light bulb?I had asked how to change a rear turn signal light in the back of a Chevy S 10..?Let the tailgate down. Where the tailgate latched there is one screw and about 4%26quot; below that will be a second screw. Remove those 2 screws and the tail light can be removed.



Hope this helpsI had asked how to change a rear turn signal light in the back of a Chevy S 10..?In the bed of the truck, right in front of the tail light assembly, you will see some small holes. They are about 1 inch in diameter. If you look inside the holes you will see some bolts sticking out with 10 mm nuts. Take the nuts off and the tail light assembly will come off, then you can change the bulbs.I had asked how to change a rear turn signal light in the back of a Chevy S 10..?This depends on what year the S10 is. Older models use four T10 torx screws that go in each corner of the lens assembly.

Newer models are accessible after lowering the tailgate. Remove the two 10mm bolts and rotate the taillight assembly out by moving the bolted end out first and releasing it from the outer body clip.

Re assembly is the opposite of removal. Hope this helps. Christopher